Pomegranate processing equipment
Inspect the equipment for fruit handling, aril pressing, juice separation, storage, evaporation, treatment and filling. Each machine has its own construction, connections and cleaning requirements.
Lift, wash and inspect incoming fruit before opening and aril separation.
Whole-fruit handling
An inclined belt carries incoming fruit between machines at different working heights. Its receiving section, retaining features and discharge arrangement connect the preparation area while keeping the fruit feed under control.
Clean the fruit exterior
Rotating brush rolls and transverse spray bars work on the fruit surface inside a supported washing bed. The arrangement combines contact cleaning with rinsing before the fruit enters inspection and opening.
Present fruit for selection
A flat moving belt gives operators a defined place to examine the fruit and remove unsuitable material. The frame, work edges and speed are arranged around practical reach and the next preparation operation.
Press prepared arils, then select a separation route to suit the juice. Clarification methods are alternatives, not a compulsory sequence.
Turn prepared feed into a juice stream
Moving filter belts and a roller arrangement release juice from the prepared feed while carrying the retained material toward discharge. The pomegranate duty starts with accepted arils and a controlled feed, followed by separate collection of juice and wet residue.
Remove selected suspended material
A rotating disc-bowl assembly separates suspended material from the juice by centrifugal action. The clarifier is selected for the liquid after extraction and coarse material control, with a clarified outlet and a separate solids-removal duty.
A membrane route for selected juice specifications
Banks of tubular membrane modules form a pressure-driven separation system for prepared juice. The passing liquid becomes the permeate, while retained material remains on the feed side and follows its own collection or recirculation route.
A separate polishing option
A filter-aid system uses a selected porous filter layer to capture suspended material from juice. The vessel, liquid supply and filtrate collection operate through a defined filtration cycle, followed by removal of the accumulated material.
Manage holding, air contact, evaporation and thermal duty as connected operations.
Organise the liquid between operations
Process tanks provide controlled liquid inventory between extraction, clarification and continuous treatment. Agitated vessels can also serve a selected batch-processing duty, while buffer vessels manage short differences between incoming and outgoing flow.
An optional liquid-conditioning operation
A vacuum vessel provides conditions for entrained and dissolved gases to leave the liquid. Product pumps, the gas-handling circuit and level control are coordinated so the treated juice can move to the following process at the required flow.
Remove water from a specified juice stream
An evaporation package supplies heat to the prepared juice, separates the generated vapor and discharges concentrate at the required condition. The selected configuration joins heat-transfer surfaces, vessels, pumps, vacuum and cooling services into one concentration process.
Connect treatment with the required outlet condition
The tubular system combines heat exchange, a selected holding path, cooling and product-flow control. It is configured for the actual juice or concentrate and the conditions needed by the next processing or packing operation.
Match the bulk filling interface and clean each closed circuit and open machine by the appropriate method.
Pack the treated liquid ingredient
An aseptic bag filler joins a prepared filling head with the selected bag fitment to transfer treated juice or concentrate into its bulk package. Filling control and container handling operate within the defined product and sterile boundaries.
Serve the connected liquid circuits
The CIP station prepares and circulates cleaning fluids through selected process equipment. Storage vessels, pumps, heating, valves and controls manage the supply and return while each connected circuit follows its agreed cleaning sequence.
Discuss your equipment
Tell us your incoming material, intended product and the machine or processing section you need.
Start a project enquiry →